|
Training Site Phone Numbers
- District 1 Eagle (610) 458-5369
- District 2 Bernville (610) 488-1637
- District 4 Newport (717) 444-7066
Training Sites are open
Tuesday – Saturday
Members who receive a Certification or Re-Certification outside of Local 542 should send in appropriate paperwork to the JATC so that we can update your local hiring hall with these certifications. We are committed to keeping the hiring halls updated with your most recent certifications. Please call the JATC with any questions.
_______________________________________________________________________
*NEW* Drone Training
Four (4) Saturdays in December. Must attend all four (4) classes.
Saturday December 7, 2019, Saturday December 14, 2019, Saturday December 21, 2019 and Saturday December 28, 2019.
Class Starts: 8:00 AM
Class Location: District 1 (Eagle) Training Site
Please call JATC Office at (215) 591-5282. Class size limited
Equipment Training
GPS Dozer and Excavator Training
Simulator Training – Backhoe, Crane and Dozer
40 Hour Steel Erection Training
If interested please call the JATC Office 215-591-5282 to be put on a class waiting list. Classes will be scheduled based on interest.
Crane Training Class
New 32 Hour Training Course offered for beginner basics for Operator Crane Training. Not NCCCO related. Course will consist of 32 hours of Classroom and Hands on Field Training. Class size will be limited so you must call the JATC at 215-591-5282 to reserve a spot.
Tuesday March 26, 2019 through Friday March 29, 2018
Classes Start: 7:00 AM
Class Location: Eagle and Bernville Training Sites
7600 Disaster Site Worker
Certification Course
16 Hours
There are no classes scheduled at this time. If interested in this course, please call the JATC at (215) 591-5282 to be put on wait list
First Aid/CPR Certification
There are no classes scheduled at this time. If interested in this course, please call the JATC Office at (215) 591-5282 to be put on wait list.
Forklift Certification
Classroom/Practical Training
Saturday April 6, 2019
Class Starts: 8:00 AM
Class Location: Eagle Training Site AND Bernville Training Site
Saturday April 13, 2019
Class Starts: 8:00 AM
Class Location: Newport Training Site
If interested in this class please call the JATC Office at 215-591-5282 to reserve a seat.
**In addition to this scheduled class, Forklift Certification will be scheduled on an ongoing basis at all training sites. Please call the the training site of your preference with your name and phone number to be scheduled**
Re-Certification Practical Evaluation
2019 Expirees
You will be receiving a letter in the mail about the need to be practical evaluated at the training site of your choice and receive a three year expiration sticker.
40 HOUR HAZMAT Certification Classes
Monday, December 2 - Friday December 6, 2019
Class Location: District 1 Union Hall Fort Washington, PA
Re-Certification Classes
Saturday, October 26, 2019
Class Starts: 8:00 AM
Class Location: District 1 Union Hall Fort Washington, PA
Call JATC Office at (215) 591- 5282 to reserve class spot – answering machine available after hours. Leave your name and you are signed up.
MSHA – Mine Safety
Re-Certification Classes
District 1: Saturday March 30, 2019
Classes Starts: 8:00 AM - 4:00 PM
Class Location: District 1 Training Site – Eagle – Glenmoore, PA
PA Crane Licensing
Any individual who engages in the operation of a crane in Pennsylvania shall be licensed by the board, or shall be authorized to operate as a trainee. The cranes that require a license to operate are all Tower Cranes and Mobile Cranes that have a rate capacity of 15 ton and above.
NCCCO – Mobile, Tower, Overhead, Signalperson & Rigger Level 1 Crane Certification
Mobile, Tower & Overhead Cranes
Test Date: Saturday, November 23, 2019
District 1 Union Hall
1375 Virginia Drive
2nd Floor
Fort Washington, PA 19034
District 1 Union Hall – Fort Washington, PA
Call for an application packet by October 18, 2019 at 215 591-5282
24 Hour Prep Course
Saturday November 2, 2019 Mobile I & Tower
Saturday Novemeber 9, 2019 Mobile II & Overhead
Saturday November 16, 2019 Mobile Review
Classes Start: 8:00 AM
Class Location: District 1 Union Hall – Fort Washington, PA
Mobile, Tower & Overhead Cranes
Test Date: Saturday, September 28, 2019
Horseshoe Tavern
3200 Susquehanna Trail
Duncannon, PA 17020
District 1 Union Hall – Fort Washington, PA
Call for an application packet by August 23, 2019 at 215 591-5282
24 Hour Prep Course
Saturday September 7, 2019 Mobile I & Tower
Saturday September 14, 2018 Mobile II & Overhead
Saturday September 21, 2018 Mobile Review
Classes Start: 8:00 AM
NCCCO Practical Exams
NCCCO Practical Exams are offered at all three of our Training Sites. Call your local Training Site to set up your practical test (within NCCCO guidelines-refer to Candidate Handbook page 3 NCCCO Certification Timeframes and page 4 Re-Certification for re-cert candidates).
OSHA 30 Hour Certification
Certification Class
District 1 Training Site (Eagle)
Dates of Class: Tuesday October 22, 2019 – Friday October 25, 2019
Time: 8:00 AM – 4:00 PM
You must attend all 4 days in order to receive certification. You must call the JATC office at (215) 591-5282 to reserve a seat for this class. Class size is limited to 25 per site
Rigger Safety Training
Eagle and Bernville Training Sites
Saturday October 5, 2019
Class Starts: 8:00 AM Eagle 7:00 AM Bernville
Class Location: Classes will be held on same day at both District 1 Eagle Training Site Glenmoore, PA and District 2 Bernville Training Site Bernville, PA
Class size is limited – You must call the JATC Office 215-591-5282 to sign up for this course.
Signalperson Safety Training
Eagle and Bernville Training Sites
Saturday October 19, 2019
Class Starts: 8:00 AM Eagle 7:00 AM Bernville
Class Location: Classes will be held on same day at both District 1 Eagle Training Site Glenmoore, PA and District 2 Bernville Training Site Bernville, PA
Class size is limited – You must call the JATC Office 215-591-5282 to sign up for this course.
PSM
Certification Classes
District 1:
Saturday October 12, 2019
Class Starts: 8:00 AM
Class Location: District 1 Union Hall Fort Washington, PA
Re-Certification Classes
District 1:
Wednesday September 11, 2019
Wednesday October 9, 2019
Wednesday November 6, 2019
Wednesday December 11, 2019
Class Starts: 6:00 PM
Class Location: District 1 Union Hall Fort Washington, PA
District 5 - Electricians' Hall
814 West Basin Road'
New Castle, DE 19720
Wednesday, August 21, 2019
Class Starts: 6:00 PM
Call 215 591-5282 (JATC office) to reserve class spot – answering machine is available after hours. Leave your name and date of class and you are signed up.
_______________________________________________________________________
Unionism Class
Saturday November 9, 2019
District 1 Union Hall
1375 Virginia Drive
Fort Washington, PA 19034
10:00 AM – 3:00 PM
If interested in this class please call the JATC Office at 215-591-5282 to reserve a seat.
|
